Problème de son : Discussion sur le forum Informatique (Logiciels et materiel PC : Informations et discussions sur les ordinateurs, les logiciels ou le materiel pc, la programmation et le high tech en général.)
Alors voilà je n'ai aucun son sur mon ordinateur, j'ai beau brancher des enceintes ça ne fait rien mais ça ne vient pas d'elle je pense parce que quand je vais dans la configuration du son, il fait comme si il n'avait rien de brancher. Et lorsque je lance Itunes, un message d'avertissement me dit qu'Itunes ne pourras peut-être pas joué les morceau car il y a une mauvaise configuration audio.
Je n'est peut-être pas installé le pilote audio, j'en ai installé un le realtek AC'97 avec le cd pilote de mon ancien ordi mais ca fait rien , je ne sais vraiment pas comment faire.
Je ne sais pas je pense pas, je n'ai rien installé d'autre que le service pack 2 XP. Mais quand je vais dans le gestionnaire de périphériques, dans USER et autres périphériques, comme vous voyez sur l'image, il y a un problème !
Et lorsque je veux ré-installer le pilote, je met le CD de Pilote que j'avais créer avec mon ancien ordi, mais il ne trouve pas le fichier qu'il faut. Ou est ce que je pourrais trouver les pilotes pour réparer ça, si tout de fois le problème vient de là.
EDIT : je pense avoir trouver le bon pilote pour l'audio, c'est a cette adresse Mais je n'arrive pas à l'installer, c'est en anglais T_T
Dernière modification par Killua the killer : 26/02/2007 à 22h00.
1 clic droit sur poste de tavail
2 matériel
3 gestionnaire de périphériques
4 double clic sur controlleur audio vidéo jeu
5 clic droit sur périphérique audio
6 mettre à jour le pilote
7 tu fais "non pas pour cette fois" et "installer à partir d'une liste ou d'un emplacement spécifié"
8 tu cliques sur le lien dans ta page internet (au numéro 8)
9 clic sur ok, suivant (next) et tu suis les instructions.
10 tu fermes tout
11 tu redémarres
Tu n'avais pas de CD de drivers avec ton pc ?
Normalement tu devrais y trouver tout ce qu'il te faut dedans.
Si tu installes un mauvais driver il y a effectivement de grandes chances que celà nefonctionne pas (ex. : ton ancien CD de drivers)
Non je n'avais pas de CD driver ! Que celui de mon ancien PC !
Sinon je ne pense p&asz que ce soit celui que tu m'as montré Zell parce que c'est écrit "select: "smwdm.inf" et lorsque je clique dessus, un nouvel onglets de Firefox s'ouvre et je trouve dedans
Spoiler
; SoundMAX device information file for NEC
; Analog Devices, Inc. Copyright(c) 1998 - 2001
; Establish max/min values for Volume nodes. "xxxxMax" is the setting for
; maximum volume level (minimum attenuation). "xxxxMin" is the setting for
; minimum volume level (maximum attenuation). These values are the Max/Min
; bits written to the register for the Max/Min level. As an example, the
; MicIn maximum volume can be set to 2 which equals a maximum output of +9 db,
; the MicIn minimum is set to 10 which equals a minimum output of - 12 db.
; (All register values are Hex.)
; Max/Min record levels. xxxRMax is the maximum gain code for that record
; source. xxxRMin is the minimum gain code for that source.
;HKR, Settings, "MicRMax", 1, 0F ; Mic
;HKR, Settings, "MicRMin", 1, 00 ;
;HKR, Settings, "ACDRMax", 1, 0F ; CD (Analog CD, not Redbook Audio)
;HKR, Settings, "ACDRMin", 1, 00 ;
;HKR, Settings, "VidRMax", 1, 0F ; Video
;HKR, Settings, "VidRMin", 1, 00 ;
;HKR, Settings, "AuxRMax", 1, 0F ; Aux
;HKR, Settings, "AuxRMin", 1, 00 ;
;HKR, Settings, "LinRMax", 1, 0F ; Line In
;HKR, Settings, "LinRMin", 1, 00 ;
;HKR, Settings, "OutRMax", 1, 0F ; Line output loopback
;HKR, Settings, "OutRMin", 1, 00 ;
;HKR, Settings, "MonRMax", 1, 0F ; Mono output loopback
;HKR, Settings, "MonRMin", 1, 00 ;
;HKR, Settings, "PhoRMax", 1, 0F ; Phone
;HKR, Settings, "PhoRMin", 1, 00 ;
; Default volume / mute settings. These are the initial installation settings.
; The volume default values are tested againts the Max/Min values that may have
; been previously established. The Boolean settings (Mute, 20 db, etc.) are
; set as 0 = FALSE, non-zero = TRUE;
;
; Note that a particular hardware platform may not implement all signal paths.
;
; This is the mixed digital PCM stream (Wave, SW Synth and Digital Redbook)
; This setting is not adjustable from a Mixer control slider. This is
; not adjustable from the Mixer applet.
HKR, Settings, "NULL", 1, 00 ; Generic handler for un-named nodes
; Record Controls
HKR, Disable, "MicR", 1, 00 ; Mic
HKR, Disable, "ACDR", 1, 00 ; CD (Analog CD, not Redbook Audio)
HKR, Disable, "VidR", 1, 01 ; Video
HKR, Disable, "LinR", 1, 00 ; Line In
HKR, Disable, "OutR", 1, 00 ; Line output loopback
HKR, Disable, "MonR", 1, 01 ; Mono output loopback
HKR, Disable, "PhoR", 1, 01 ; Phone
;If you want the MonoOut to track the Master Volume control, set MonoWithMaster
;to 01. If you want separate Master Volume and MonoOut controls, set
;MonoWithMaster to 00. If MonoWithMaster = 01, the "MonoOut" controls will _not_
;be present on SndVol32 (the Master Volume control will control the MonoOut
;output)
HKR, Settings, "MonoWithMaster", 1, 00 ; 00 = Normal, 01 = MonoOut tracks Master
;If a AD1885/6 is detected and you want the (headphone) amplifier to track the
;Master Volume control, set HPWithMaster to 01 (same code written to Master
;Volume and Headphone volume based upon Master volume settings). If you want
;separate controls for the Master Volume and Headphone, set HPWithMaster to 00.
;If ;HpWithMaster = 01, the "Headphone" controls will _not_ be present on
;SndVol32 (the Master Volume control will control the Headphone amplifier output)
;If HpWithMaster = 01, the following INF settings are ignored, HP_VMax, HP_VMin,
;HP_V, HP_M, HP_P.
;An AD1887 uses the settings for the Master Volume to control the output and
;automatically sets HPWithMaster.
;If a AD1885/6 is detected and the (headphone) amplifier is used, set HP_P to 00.
;If the amplified output is not used, set HP_P to 01. If you selected
;HPWithMaster, this setting is interpreted to be 01 (not active).
[SPDIF.AddReg]
; Enable/Disable the S\PDIF channel
; 00 = Disable S\PDIF channel
; 01 = Enable S\PDIF channel
HKR, Settings, "SPDIFEnable", 1, 00
; S/PDIF channel Data Type
; 01 = AC3 Only
; 02 = PCM Only
; 03 = AC3 or PCM
HKR, Settings, "SPDIFDataType", 1, 01
[Normal.AddReg]
HKR, Settings, "HPWithMaster", 1, 00 ; 00 = Normal, 01 = Amplifier output tracks Master
HKR, Settings, "HP_VMax", 1, 06 ; Headphone Volume
;HKR, Settings, "LinVMax", 1, 00 ; LineIn Volume
;HKR, Settings, "ACDVMax", 1, 00 ; Analog CD Volume (not digital redbook !)
HKR, Settings, "MicVMax", 1, 02 ; Mic In Volume
HKR, Settings, "PCMOutVolume", 1, 07 ; PCM Out volume 8 = 0db gain, 7 = +1.5db
HKR, Settings, "20db", 1, 01 ; Mic 20db Gain (enable gain = 1)
HKR, Settings, "MicV", 1, 08 ; Mic In Volume
HKR, Settings, "LinV", 1, 08 ; LineIn Volume
HKR, Settings, "HP_V", 1, 08 ; Headphone Volume
HKR, Settings, "PCBV", 1, 08 ; PCBeep Volume
HKR, Settings, "PCBM", 1, 01 ; PCBeep Mute
HKR, Disable, "PCBV", 1, 01 ; PCBeep Volume
HKR, Disable, "PCBM", 1, 01 ; PCBeep Mute
HKR, Disable, "MicS", 1, 00 ; Mic In Select
HKR, Disable, "HP_P", 1, 00 ; Headphone Pin (Headphone destination on 1885/6)
; 00 = active, 01 = not active
[Mobile.AddReg]
HKR, Settings, "HPWithMaster", 1, 00 ; 00 = Normal, 01 = Amplifier output tracks Master
HKR, Settings, "HP_VMax", 1, 04 ; Headphone Volume
HKR, Settings, "LinVMax", 1, 08 ; LineIn Volume
HKR, Settings, "ACDVMax", 1, 08 ; Analog CD Volume (not digital redbook !)
HKR, Settings, "MicVMax", 1, 08 ; Mic In Volume
HKR, Settings, "PCMOutVolume", 1, 08 ; PCM Out volume 8 = 0db gain, 7 = +1.5db
HKR, Settings, "20db", 1, 00 ; Mic 20db Gain (disable gain = 0)
HKR, Settings, "MicV", 1, 0C ; Mic In Volume
HKR, Settings, "LinV", 1, 0C ; LineIn Volume
HKR, Settings, "HP_V", 1, 04 ; Headphone Volume
HKR, Settings, "JackSenseDisable", 1, 01 ; Disable Jack Sense circuitry
HKR, Settings, "P3DM", 1, 01 ; Phat 3D Mute
HKR, Settings, "PCBV", 1, 00 ; PCBeep Volume
HKR, Settings, "PCBM", 1, 00 ; PCBeep Mute
HKR, Disable, "P3DV", 1, 00 ; Stereo Wide (Phat 3D) Volume
HKR, Disable, "P3DM", 1, 00 ; Phat 3D Mute
HKR, Disable, "P3DB", 1, 00 ; Phat 3D Bypass for digital streams
HKR, Disable, "PCBV", 1, 00 ; PCBeep Volume
HKR, Disable, "PCBM", 1, 00 ; PCBeep Mute
HKR, Disable, "MicS", 1, 01 ; Mic In Select
HKR, Disable, "HP_P", 1, 01 ; Headphone Pin (Headphone destination on 1885/6)
; 00 = active, 01 = not active
[No1886.AddReg]
HKR, Settings, "HPWithMaster", 1, 00 ; 00 = Normal, 01 = Amplifier output tracks Master
HKR, Settings, "LinVMax", 1, 08 ; LineIn Volume
HKR, Settings, "ACDVMax", 1, 08 ; Analog CD Volume (not digital redbook !)
HKR, Settings, "MicVMax", 1, 08 ; Mic In Volume
HKR, Settings, "PCMOutVolume", 1, 08 ; PCM Out volume 8 = 0db gain, 7 = +1.5db
HKR, Settings, "20db", 1, 00 ; Mic 20db Gain (disable gain = 0)
HKR, Settings, "MicV", 1, 0C ; Mic In Volume
HKR, Settings, "LinV", 1, 0C ; LineIn Volume
HKR, Settings, "HP_V", 1, 04 ; Headphone Volume
HKR, Settings, "JackSenseDisable", 1, 01 ; Disable Jack Sense circuitry
HKR, Settings, "PCBV", 1, 08 ; PCBeep Volume
HKR, Settings, "PCBM", 1, 01 ; PCBeep Mute
HKR, Settings, "UseSPDIFChannel", 1, 00 ; 00 = Disable SPDIF
HKR, Disable, "PCBV", 1, 01 ; PCBeep Volume
HKR, Disable, "PCBM", 1, 01 ; PCBeep Mute
HKR, Disable, "MicS", 1, 01 ; Mic In Select
HKR, Disable, "AuxR", 1, 01 ; Aux
HKR, Disable, "HP_P", 1, 01 ; Headphone Pin (Headphone destination on 1885/6)
; 00 = active, 01 = not active
[Ena.AddReg]
HKR, Settings, "P3DM", 1, 00 ; Phat 3D Mute
HKR, Disable, "P3DV", 1, 00 ; Stereo Wide (Phat 3D) Volume
HKR, Disable, "P3DM", 1, 00 ; Phat 3D Mute
HKR, Disable, "P3DB", 1, 00 ; Phat 3D Bypass for digital streams
HKR, Disable, "AuxR", 1, 00 ; Aux
[Dis.AddReg]
HKR, Settings, "P3DM", 1, 01 ; Phat 3D Mute
HKR, Disable, "P3DV", 1, 01 ; Stereo Wide (Phat 3D) Volume
HKR, Disable, "P3DM", 1, 01 ; Phat 3D Mute
HKR, Disable, "P3DB", 1, 01 ; Phat 3D Bypass for digital streams
[AC97Aud.Interface.Topology]
AddReg=AC97Aud.Interface.Topo.AddReg
;;must use topo because topology is too long
[AC97Aud.Interface.Topo.AddReg]
HKR,,FriendlyName,,%AC97Aud.Topology.szPname%
;; Analog Devices friendly names (localizeable)
;Sources (Pins)
Pin.PcBeep ="PC Beep" ; PC Beep Input
Pin.MonoOut ="Mono Out" ; Mono line output
Pin.Phone ="Phone" ; Phone Input
Pin.Video ="Video" ; Video Input
Pin.Front ="Front" ; Front Output
Pin.Surround ="Surround" ; Surround Output
Pin.Center ="Center" ; Center Channel Output
Pin.Lfe ="Lfe " ; Sub woofer ( Lfe )
;Controls (Controls as related to Sources)
Control.PCBeepVol ="PCBeep Volume" ; PC Beep volume control name
Control.PhoneVol ="Phone Volume" ; Phone volume control name
Control.VIDVol ="Video Volume" ; Video volume control name
Control.20DB ="+20db Gain" ; Microphone advanced control
Control.PHATBypass ="Apply 3D effect to digital audio"
; 3D bypass control string (bypass
; spatialization on digital streams)
Control.MonoVol ="Mono Volume" ; Monoaural Output volume control name
Control.MicSelect ="Mic2 Select" ; Microphone advanced control
Control.CaptureVid ="Video" ; Video Record
Control.CaptureMono ="Mono Out" ; Mono Mix Record
Control.CapturePhone ="Phone" ; Phone Record
Control.FrontVol ="Front Volume" ; Front Output
Control.SurroundVol ="Surround Volume" ; Surround Output
Control.CenterVol ="Center Volume" ; Center Channel Output
Control.LfeVol ="Lfe Volume" ; Sub woofer ( Lfe )
Control.CaptureWOMix ="WAVE?o—ÍMIX" ; Wave Out Mix Record
*WDM_AC97AUD.DeviceDesc="SoundMAX Integrated Digital Audio"
AC97Aud.Wave.szPname="SoundMAX Digital Audio"
AC97Aud.Topology.szPname="SoundMAX Digital Audio"
;WDM_AC97AUD.SvcDesc = "SoundMAX Integrated Digital Audio"
; History Information
DriverMfgr="AnalogDevices"
DriverVersionID="5.12.3030"
INFVersionID="5.12.01.3030-0000"
DriverBuildDate="07/25/2001"
DriverOEM="AnalogDevices"
DriverFamily="Audio"
DriverProduct="SoundMAX"
DriverDescription="Audio Driver"
DriverOEMVersion="x00"
BaseDriverFileName="smwdm.sys"
BaseDriverFileVersion="5.12.3030"
Problème de son 
